HORIBA : Compact pH Meter <Twin pH> B-211/212/213

HOME >> Products >> Analytical Instruments & Systems >> Compact pH Meter <Twin pH> B-211/212/213


Compact pH Meter Twin pH B-211/212/213



	1. Sensor guard protects the electrode The delicate flat sensor is protected by a sensor guard to ensure safety during use. To perform scoop measurement, just slide back the lid. 2. The replaceable sensor prolongs useful life Cartridge-type sensors are simple to replace. Please note that the horizontal sensor may be broken by a strong, direct impact. 3. CAL button simplifies standardization* Takes all the fuss out of reference calibrations. The Twin automatically makes the calibration with just a push of this button. 4. Auto shutoff saves batteries If you forget to turn off the Twin, after 60 minutes of non-use, the Auto-ShutOff circuit automatically turns it off for you.



	1. pH Readout Measured pH values are shown to 1/100 pH; calibration values to 1/100. (Readout blinks when pH values is below 0 or above 14 pH.) 2. Battery warning Alerts you to low battery. 3. Temperature warning The "°C" blinks when the temperature exceeds the range 0 - 40°C 4. Calibration indicator Lights up during reference calibration. 5. Stable-readout indicator Lights up when readout has stabilized.

Copyright © 2008 HORIBA, Ltd. All rights reserved. The information shown on this document may be modified without notice. Refer to the original web page for update. The page was copied from: