Japan Worldwide
News & EventsInvestorsProcurementCompany HomeContactsSite MapJapanese
Products & Support Automotive Process & Environmental Medical-Diagnostics Semiconductor Scientific Applications
Measurement Types
Product List
 HOME >> Products & Support
Analytical Instruments & Systems Products
product image
LA-910
Specifications
Details
Detailed Specifications
Accessories

Specifications
Principles of measurement Based on Mie scattering theory
Range of particle size measurement 0.02 to 1000 µm
Measurement time approx. 20 seconds, normally from start ofmeasurement to display of data.
Amount of sample liquid required for measurement 10mg to 1g per measurement, with 215 to 315 ml of dispersant fluid when using the flow cell
*This figure depends on the sample
Optical system Light source: 632.8 nm He-Ne laser 1mW, Tungstenlamp 50W
Photo cell detector 18-division, silicon photo-diode array; andSilicon photo-diode (X6)
Sample recirculation system Mechanical stirrer: Up to 1000rpm (for distilled water), 7 speed selections, silicon-tubing
Ultrasonic chamber 40 W, 39kHz
Circulation pump Peristaltic pump, discharge volume 1000mL/min.(for distilled water), 7 speed selections,silicon-tubing
Sample flow cell Tempax grass
Communications RS-232C
Operating conditions 10° (50°F) to 35°C (75°F), less than 85% RH (no condensation)
Computer COMPAQ DESKPRO
(Subject to change at discretion of manufacturer.)
OS MS-DOS 6.0
Operation interface Microsoft Windows TM Ver. 3.1
Power 100/120 to 200/220 to 240 V AC.
Selectable, 50/60 Hz, approx. 500VA
Dimensions 650 (W) x 570 (D) x 320 (H) mm
25.6 (W) x 22.4 (D) x 12.6 (H) inch
Weight Approx. 55kg, 120 lbs. (*Excluding the computer)
TOP
Copyright (C) 2008 HORIBA, Ltd. All rights reserved.

Copyright © 2008 HORIBA, Ltd. All rights reserved. The information shown on this document may be modified without notice. Refer to the original web page for update. The page was copied from:
 
Explore the future HORIBA