The new HORIBA OCMA-305 oil content analyzer comes loaded
with a welcome range of innovative features.
A Powerful built-in computer makes the new version a joy to use.
Just pour in an aqueous sample and solvent then push a single button.
The OCMA-305 takes over and does everything for you - from extracting
the oil components to measurement and drain. The whole process is fast,
sure, super-accurate - and, of course, no more troublesome range-switching.
Now anyone can make precision analyses without special training.
HORIBA has developed Type H-997 extraction solvent for use with the OCMA.
The H-997 solvent can also be recycled by using HORIBA's optional Solvent
Reclaimer.
The OCMA-305 is much more versatile, even simpler to use. HORIBA is proud
to introduce to the world a truly user-friendly oil content analyzer.
Recommended Applications
• Industry: Monitoring of waste-water influent and effluent
• Marine Transportation: Bilge and ballast discharge
• Petroleum: Monitoring plant efficiency of oil/water separation
• Oil Depots: Monitoring of discharge from cleaning of storage tanks
• Automotive: Monitoring waste-water discharges from service stations
• Environment: Surveying environmental water quality and hazardous waste sites
• Quality Assurance: Measuring residual oil on textiles, metal parts, etc.
Built-in computer automates calibra-tion and
measurement procedures.
Once you have introduced the solvent and oily water sample to the unit,
just push the START button. Everything is automated - from mixing and
extracting the oil components to measurement and drain. Calibration is
a snap. Just introduce de-ionized water in place of the oily water sample,
and the OCMA-305 handles the automated process for you.
 |
(*1)
|
Complete dispersion, mixing, and extraction.
The extraction chamber uses HORIBA's special-design
agitator blades. Just push the START button to initiate a powerful
rotary dispersion and mixing action. To assure proper measurement
of your oil sample, the extraction time can be pre-set in 10-second
increments to any desir-ed interval - from 10 seconds to 10 minutes.
|
(*2)
|
Automatic fill and drain
The sample cell is filled and drained automatically
by solenoid valves. There are no clumsy manual valve to switch.
|
0 - 200 mg/L dynamic range
A pyro-electric sensor gives you a full dynamic range from 0 - 200 mg/L, with no need for range-switching. this makes the OCMA-305 perfect for fast, accurate measurements of all types of samples, from low to high concentration.
Short warm-up time
Warms up in 20 minutes or less. This means you can get started three times
faster than before.
Optical adjustment unnecessary
The troublesome optical adjustments as-sociated with conventional pneumatic
NDIR analyzers is no longer necessary.
Stable measurement readout
The OCMA-305 determines automatically when the measured value has stabilized,
and holds that value for you. This means you always get consistent, stable
data readouts.
Self-diagnosis function
The unit self-monitors for any possible problems, e.g., glitches during
measure-ment; motor or sample-transfer malfunc-tions; deterioration of
the light-source; or electrical problems. Should anything out of the ordinary
occur, you can spot it right away by a quick check of the warning lamps
and the linked on-screen error messages.
