 |
|
|
Pb/Cd X-ray Fluorescence Analyzer
XGT-1000WR
The XGT-1000WR employs a narrow-beam, high-intensity
X-ray beam method that uses HORIBA's original X-ray beam concentration
element. This provides shorter measurement time and greater precision
than methods using an X-ray collimator. Furthermore, the X-ray detector
uses a high-purity Si detector, the only one of its type in the
world, which provides superb long-term stability.
Use a camera to
specify the target.Then, with just one button, perform high precision
analysis of an area 1.2 mm* in diameter.
1. Put in the sample. |
|
2. Using the CCD camera,
specify the area to be tested. |
Simply place the sample directly into the
sample chamber.
The irradiation diameter is 1.2 mm, so even small parts can
be measured as is. The XGT series makes it easy for almost
anyone to perform precise measurements. |
|
The area to be tested can be specified easily,
even for parts with multiple plastic sections, by observing
the sample using the 50X CCD camera. |
|
3. Press the button. |
|
4. You get highly accurate readings
of the material elements. |
Just press the button to perform the analysis
automatically. |
|
The analysis results are displayed quickly
and accurately. |
* Systems with optional switching between 1.2
mm and 0.1 mm diameter analysis areas are also available.
|
|
